48
Figure 4.6.2. Network Setup Screen – DDNS
Table 4.6.2. DDNS
Item
Description
Enable DDNS
Turn DDNS on/off
Host Name
This item allows the user to setup a domain name manually,
using virtual keyboard displays as shown.
Submit/Update
When manual host name input is done, move the cursor to this
item and select ON to submit the settings.
ezDDNS
Enable/disable ezDDNS to register the host name automatically.
4-6-3. Network Port and Web Port
Connecting NS/NSP through a common IP sharing device, each NS must be assigned a unique TCP port
number for access from outside the LAN.
This port number is displayed on NETWORK>NETWORK PORT
Setup MENU.
NOTE:
If you access the NS only within the same LAN, the TCP port number does not need to
be changed.
Network access beyond a router
To access NS beyond a router (firewall), you must open the proper TCP ports for live/playback streaming,
for commands, for remote backup, and for audio streaming. If these ports are not opened properly, you
can’t access the NS beyond a router.
o
For live/playback streaming, for commands, for remote backup
: Open the port number
on NETWORK>NETWORK PORT menu. The default port number is 5445.
o
For bi-directional audio:
Open the port number on NETWORK AUDIO PORT. The default
port number is [NETWORK PORT 1].
o
For web-viewer downloading and remote firmware upgrading
: Open the port number on
NETWORK>WEB PORT menu. The default port number is 80.
o
For IP Camera Setup through web viewer
: Forward ports 59011 ~ 59254 to the NVR.
4-7. Setup – User Management Mode
In the Setup menu, select the User Management tab. Then, the User Management menu is displayed as
pictured below. Navigate through the menu items or change the settings using the mouse or the remote
control.
