Speco N16NRP User Manual Download Page 52

Page: 52 / 76

Alarm Management

NVR User Manual

9.4.2 Warning Handling Settings

①

Click Start



Settings



Alarm



Exception



Warning Handling Settings to go to the interface as shown below.

②

Enable or disable “Push”, “Alarm-out”, “Buzzer”, “Pop-up Message Box” and “E-mail”. The exception handling settings are similar to that of the

sensor alarm (see 9.1 Sensor Alarm for details).

③

Click “Apply” to save the settings.

9.5 Alarm Event Notification

9.5.1 Alarm-out

①

Click Start



Settings



Alarm



Event Notification to go to the following interface.

②

Set the delay time and the schedule of each alarm-out. You can click “Edit Schedules” to edit the schedules (see 7.3.1 Add Schedule for

details).

③

Click “Apply” to save the settings. You can click “Test” to test the alarm output.

9.5.2 E-mail

Click Start



Settings



Alarm



Event Notification



E-mail to go to the e-mail configuration interface. Set the e-mail address of the recipients. See

11.1.5 E-mail Configuration for details.

Summary of Contents for N16NRP













































































Search results

Summary of Contents for N16NRP

Reviews:

Brands by name

Popular brands

Speco N16NRP, User Manual

Search results

Summary of Contents for N16NRP

Reviews:

Brands by name

Popular brands