Speco HFB4M, Instruction Manual, Page: 22 / 32

- 22 -
BLC
H-POS
V-POS
H-SIZE
V-SIZE
RETURN 11
10
3
3
WDR
WDR MODE
WEIGHT
RETURN FRAME
OFF
◆ WDR : The WDR (Wide Dynamic Range) function works to correct excessive light within the frame to
produce a usable image. When the image has simultaneous bright and dark areas, it makes both areas
distinct. If you select WDR, a submenu appears where you can make finer adjustments.
- WDR MODE : The Specific WDR area can be selected.
* BOX
WINDOW ZONE [0~3]
WINDOW USE [ON/OFF]
H-POS [1~1920] : You can select the horizontal starting position of the monitoring area.
V-POS [1~1080] : You can select the vertical starting position of the monitoring area.
H-ZISE [1~1920] : You can select the horizontal size of the monitoring area.
V-SIZE [1~1080] : You can select the vertical size of the monitoring area.
* POLYGON
WINDOW ZONE [0~3]
WINDOW USE [ON/OFF]
POS0-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS0-Y : You can select the vertical & Diagonal starting position of the monitoring area.
POS1-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS1-Y : You can select the vertical & Diagonal starting position of the monitoring area.
POS2-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS2-Y : You can select the vertical & Diagonal starting position of the monitoring area.
POS3-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS3-Y : You can select the vertical & Diagonal starting position of the monitoring area.
- WEIGHT [MIDDLE, HIGH, LOW] : Select the WDR level of the camera.
Speco(Fit).indd 22 2020-05-21 오전 9:52:24