3.
And then secure the mounting base to the ceiling or wall with the screws
provided.
Route and connect the cables.
4. Fix the camera to the mounting base with the lock screw.
Sponge
Mounting
Base
4
5. Three-axis adjustment. Before adjustment, preview the image of the camera on a monitor and then
adjust the camera according to the figure below to get an optimum angle.
6. Install the lower dome back to the camera with the screws and remove the protection film softly to
complete the installation.
Rotation 0°~360°
Pan 0°~360°
Tilt 0°~75°