●
Backlight
Compensation
(
BLC
)
When the back of the captured object is too much bright, you can set BLC for the captured object to
make it clearer.
Cables
Power
Cable
Video Output
Video Switch Cable
Video Switch: Four video output modes can be optional--AHD, TVI, CVI and CVBS
(a) remove the cover of the video switch cable; (b) hold and press the button in the video
switch cable for 5 seconds to switch the current video output.
2
Before you start, please make sure that the wall or ceiling is strong enough to withstand three times
the weight of the camera. Please install and use the camera in the dry environment.
You’d better install back the lens cover or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
►
Mounting for H8B6M
1. Drill the screw holes and the cable hole on the wall according to the drill template.
∅
4.6
∅
25.1
∅
82.0
∅
72.2
120°
120°
62.5mm
18.1mm
36.1mm
2. Route and connect the cables .
3. Secure the mounting base with camera to the wall with screws as shown below.
