42
warning message on screen.
In Notification, each system events can be synchronized with single and multi callback or
emailing sites. Press
to enter callback or email address to be synchronized with system
events.
2-6-6. MENU > EVENT > G-Sensor
Built-in G-Sensor, it detects, Quick Start, Quick Stop and Traffic Accident.
It allows to associate with Recording, Alarm and Event Notification using detected information.
Use G-Sensor : Enable or Disable to use G-Sensor
Record: Associate with G-Sensor, select the camera that you will record.
Alarm: Associate with G-Sensor, select the Alarm that you will output
Notification: Associate with G-Sensor, select the Address that you will send.
Installation: D4M needs to be installed as shown in the first image.
Following other
reference images, only if SD or SSD is being installed.
Sensitivity: Set G-sensor’s sensitivity level from
±
0.1G to
±
3G (1 to 30 under menu option) for
each X, Y, Z axis. The default sensitivity level is 5(
±
0.5G).
Any shocks or vibration bigger than the pre set G sensor sensitivity level will be detected and
recorded as an event. This G-sensor related event can also be sync with Recording, Alarm and
Remote Notification as any other events options.