Product: D8WRSPMQB2
AI- D8WRSPMQB2 Rev a
4/22/14
Page 7 of 20
Speco Technologies Confidential
200 New Highway, Amityville NY 11701
3)
Attach the Monitor board to the unpainted side of the
WRSMPlate
using two 2-56 screws
(
90272A081
), two 2-56 nuts (
90480A003
) and two bumpers (
9540K11
). Place the bumper
between the board and the plate as shown below. The nut should be on the board.
4)
Connect the power board cable and the video cable to the monitor board
5)
Release the ribbon from the back of the monitor and place the power connector through the
hole in the
WRSMPlate
.
