Product: D8WRSPMQB2
AI- D8WRSPMQB2 Rev a
4/22/14
Page 14 of 20
Speco Technologies Confidential
200 New Highway, Amityville NY 11701
9)
Route the Splitter as shown below. Connect the YDCSplitter to the monitor and to the DVR.
10)
Zip tie the balance of the splitter so it is neat.
11)
The unit is now ready for the monitor plate to be mounted. Move the Monitor sub assembly
onto the unit.
12)
Attach the Video connector from the monitor board to the RCA to BNC connector and attach
to the BNC Video output on the DVR. Zip tie the cable so it runs cleanly back up the
connector toward the monitor.
Sata
Combo
Connector
SATA DATA
SATA
Power
Zip Tie
Splitter Input
Monitor
Splitter End
DVR Splitter End
