General
The following information should give you the basics on how to install the via Fader (V.F.) and power
module. The proper installation of the V.F. requires a clear understanding of audio wiring, AC
distribution, grounding, and shielding techniques.
If the V.F. is being installed into a larger studio or as an expander to a host console, it may be
necessary to retain the services of someone experienced in these matters.
Unpacking & Inspection
The V.F. is delivered in a special protective container and was carefully inspected both mechanically
and electrically before shipment. All items should be physically free of mars and scratches and in
perfect electrical order upon receipt. To confirm this, the mixer and power supply should be inspected
for physical damage that may have occurred in transit. Any damage should be reported to your dealer
or delivery company as soon as possible.
If the product is to be shipped to Speck Electronics for service or repair contact Speck Electronics for
a Return Merchandise Authorization (RMA). Include the model number and serial number of the
product. Place the product in the original container if available. If the original container is not used,
wrap the product in heavy plastic before placing in an inner container. Use plenty of packing material
around all sides of the product and protect panel faces with cardboard strips. Mark shipping container
with "Delicate Instrument" or "Fragile", and insure the shipment for the proper amount.
Cleaning
To clean the front panel, wipe the surface gently using a soft lint-free cloth to avoid scratching the
panel or markings. Paper towels are not recommended. Commercially available window cleaner
solutions may be used; however, the solution should be applied to the cloth and not the panel to avoid
the seepage of liquid to the inside of the enclosure.
Do not use brushes or feather dusters to remove dust. This may cause dust to fall into the openings
around the slide fader and pushbutton switches.
Mechanical Installation
The via Fader was designed to be placed on a desktop or installed in a 19" rack. The location of the
via Fader should be such that the operator has a clear, unobstructed view of the front panel from
his/her normal operating position. The unit should also be within easy reach of the operators’ normal
position in order to facilitate the use of the front panel controls.
Installation
Chapter 2
Installation Section
3
