1. Mono Fader
This mono 100mm slide fader adjusts the level of
the
F.1.
channel and has a range of ∞dB to 10dB.
The operation of the slide fader adjusts the level to
the XLR line output.
The “0” mark is the “unity gain” setting for the
fader channel.
Fader Input to Fader Output Gain
With a ba4dBu signal present at the XLR
line input, the fader set to the “0” mark, and the
Gain Select jumper in the default (0dB) position
the corresponding balanced XLR line output will
be +4dBu.
With the gain jumper in the 6db or 10dB position
and the slide fader set at the “10” mark, this will
give the channel a total of 16dB or 20dB of gain
respectively.
2. Power LED
This LED will illuminate green when power is
applied to the Fader 1.
Fader 1 Top Panel
Chapter 3
9
Fader 1
Operation Section
2
1