Installation
The following information should give you the basics on how to install
the EQF 810. The proper installation of the EQF 810 as part of a larger
system requires a clear understanding of audio wiring, AC distribution,
grounding, and shielding techniques.
When the EQF 810 is being installed into a larger system, it may be
necessary to retain the services of someone experienced in these
matters.
The EQF 810 is delivered in a special, protective shipping container
and was carefully inspected both mechanically and electrically before
shipment. It should be physically free of mars and scratches and in
perfect electrical order upon receipt. To confirm this, the product
should be inspected for physical damage that may have occurred in
transit. Any damage should be reported to your dealer or delivery
company as soon as possible.
If installed in an equipment rack that also contains heat producing
equipment, adequate ventilation should be provided. This will prolong
component life and maximize operational stability.
To insure adequate airflow around the unit and to prevent overheating,
do not obstruct the air vents on the side and top.
While the internal circuitry of the EQF 810 is fully shielded by the steel
chassis, installation should nevertheless be planned to avoid locating it
immediately adjacent to power amplifiers, power supplies, or any
source of low frequency electromagnetic emissions.
General
Unpacking and inspection
Environmental considerations
Chapter 2
Installation Section
5
