The front and rear panels are a high quality painted surface and the
panel lettering is applied using a silkscreen printing technique.
To clean the front or rear panel, wipe the surface gently using a soft
lint-free cloth to avoid scratching the panel or markings. Paper towels
are not recommended. Commercially available window cleaner
solutions may be used; however, the solution should be applied to the
cloth and not the panel to avoid the seepage of liquid to the inside of the
enclosure.
The following information is provided as a general guide for
repackaging your EQF 810 for shipment. If you have any questions,
contact Speck Electronics at +760-723-4281.
If the product is to be shipped to Speck Electronics for service or repair,
contact Speck Electronics for a Return Merchandise Form. When we
receive the completed form, a RMA number and shipping instructions
will be issued. Place the product in the original container if available.
If the original container is not used, wrap the product in heavy plastic
before placing in an inner container. Use plenty of packing material
around all sides of the product and protect panel faces with cardboard
strips. Mark shipping container with "Delicate Instrument" or
"Fragile," and insure the shipment for the proper amount.
Note: Speck Electronics cannot be responsible for equipment that
arrives damaged or uninsured.
Cleaning
Repacking For
Shipment
Chapter 2
Installation Section
7
