background image

Gasket

Winter Cover

M8 Washer (4x)

M8 x 30mm Screw (4x)

10

Winterizing

Figure 5
Winter Cover Kit

In areas subject to freezing water temperatures, you should protect your equipment. We recommend you purchase a winter 
cover kit part #2326000010K. This kit includes one (1) winter plate, one (1) gasket, four (4) M8 washers, and four (4) M8 x 
30mm screws. (See Figure 5) Please contact your local pool professional for installation.

I can over swim the system, is there something I can do to help me from swimming through the system? Slow your 
pace down until you found the stroke that will prevent you from out swimming the system. Depending on the size of the pool 
you could drift back and swim into the stream and try to find the “sweet spot” which is about 4’ from the jets. 

How can I use the system for my kids? Our BADU swim jets systems will add fun and enjoyment for all ages. The kids can 
boogie broad against the current. Kids can play in front of the current. To do this turn the air up and just the adjust nozzles 
upwards to create a choppy white water effect.

What is a self-priming pump?
A self-priming pump has the ability to remove air from the plumbing lines when installed above water level (up to 4 feet). 
During the initial startup, the pump must be filled with water. You should never run the pump dry.

Why must a self-priming pump first be filled with water?
A self-priming pump must have a sufficient amount of water in the pump housing. Only then can air be removed from the 
suction line. It is necessary to fill your pump up to the suction connection with water. If you do not fill the pump with water 
you may damage the mechanical seal in the pump.

What are the maintenance requirements for the pump?
The Speck Model 21-80/33 GS pumps are generally maintenance free. From time to time you should carry out a visual 
inspection. Check to see if pump is leaking, a few drops is normal. Remove any debris around the pump. 

Does the LED light come in different colors?
Yes. The LED light comes in blue or a multi-color option. 

How many amps does the pump operate at? 
4.0 HP: Maximum 21.0 - 19.4 Amps @ 208-230 V

Frequently Asked Questions

Frequently Asked Questions

Summary of Contents for BaduJet super-sport II





































Reviews: