| Description |
9
LED Indications
There are three green LEDs in the FX camera back panel, one for status and two for GigE traffic indication.
Status LED
Status
Not lit
Power off
Stable green
Power on
GigE LED 1
Status
Not lit
No data connection
Blinking green
Data connection active
GigE LED 2
Status
Not lit
No data traffic
Blinking green
Data being transmitted
Frame Grabbers
Compatible Frame Grabbers
When you use a Camera Link camera, the system requires a frame grabber installed on the data aqcuisition PC.
The frame grabbers that have been tested to work with LUMO in WIN10 are:
• NI 1430
• Dalsa Xtium-CL_MX4
• Epix PICXi EB1
Frame Grabber Relevant Configuration
The parameters and settings, which are essential to configure the frame grabber are shown in the following table.
Table 2: Summary of parameters needed for frame grabber configuration
Pixel Clock per Tap
80 MHz
Number of Taps
2
Greyscale resolution
12 bit / 10 bit / 8 bit
Line pause
18 clock cycles
All rights reserved - Specim, Spectral Imaging Oy Ltd.
