| Software Options |
18
Software Options
Lumo Software
Lumo is a family of software products for hyperspectral sensor data acquisition.
• Lumo Recorder, for when there is no Specim scanner used in the setup
• Lumo Scanner, for when there is a Specim scanner in use
With Lumo Software you can select camera and scanner, adjust acquisiton parameters, and save raw data of the
camera. It can also control other external devices, required for certain sensors, such as thermal calibrator, triggering
electronics, motors, and so on.
Lumo Software has a built-in scripting and sequential workflow engine controlling all the steps and automation to be
performed for each measurement.
For instructions on how to use your Lumo software, refer to the relevant Lumo Software User Manual.
SpecSensor SDK
SpecSensor SDK is a unified SDK for all our cameras, and it is typically used by OEM and integrators. C style API
can be used from different programming languages.
SpecSensor SDK sends commands to cameras and gets the frames from the cameras, however it does not have a GUI
or record data to the disk.
For instructions on how to use your Specim SDK, refer to the SpecSensor SDK User Manual.
ASCII Commands
the Camera Link version of the FX camera can be controlled with ASCII commands, for example in cases where
hyperspectral imaging is intregated in an existing ASCII based system or when required features are not supported by
LUMO or LUMO SDK Software.
ASCII commands are availabe in separate ASCII documentation. Note, that Specim does not provide support
packages for ASCII use cases.
GigE Vision
GigE version of the FX camera is complient with GigE Vision interface standard, which is a global standard for
video transfer and device control over Ethernet networks. For more information, refer to GigE Vision Standard
Specification.
All rights reserved - Specim, Spectral Imaging Oy Ltd.
