Bergeron By Design • 15 South Second St. Dolgeville, NY 13329 • 1.866.529.8407
Product Care
Clean chair with damp cloth. With normal
use, over time screws may loosen. Please
check regularly.
Only use chair on smooth
level surface.
Notice
Use only Height Right Chair accessories and parts. Height Right Chair parts are not interchangeable with other manufacturers’ products.
Replace any worn parts immediately for safety. © 2013 Bergeron By Design.
Customer Service
Toll Free:
1.866.529.8407
International:
1.315.429.8407
Fax:
1.315.429.8862
5 Year Limited Warranty
Bergeron by Design warrants to the original retail purchaser of the Height Right
Chair product, that if any part or component proves defective in material or
workmanship within five years of the purchase date, the defective part will be
repaired or replaced (at Bergeron by Design’s discretion) free of charge. Warranty
service may be performed by an authorized service center or at Bergeron by
Design’s discretion.
This warranty does not cover normal wear and tear, or damage caused by accident
or misuse.
To exercise this limited warranty, the user should first obtain a Return Authorization
Number from Bergeron By Design.
The product must be delivered charges pre-paid (UPS recommended) to the
factory or to an authorized service center, together with a copy of the original
invoice, the Return Authorization Number and a written description of the problem.
14
12
9
Attach the Right Tray Clip as shown
with 2 Supplied Screws. Repeat
for Left.
TIGHTEN ALL SCREWS (BOTH SIDES)
IN
ORDER 1-5 _DO NOT OVER TIGHTEN!
Top Metal
Cross Bar
Bottom
Metal
Cross Bar
Front
Support
Back Rest
Back Leg
Supports
5
4
3
2
1
From the rear of the chair : Slide seat plate and Early Pelvic Positioner in
1ST rung above top metal cross bar until Early Pelvic Positioner
mates with backrest.
Install Tray Clips
13
Installing Tray and using Clips
10
Thread top metal cross bar through
hanging loops under Early Pelvic
Positioner seat.
11
Reinstall top metal cross bar using original
screws.
Wood back & Insert “mate”
7
b
a
When Tray is properly installed an
audible “click” will be heard from primary lock.
Engage the second safety Latch Lever by
pushing it forward into the primary spring lock.
“CLICK”
Second
Safety Latch
Engaged.
Primary
Spring Lock
13b
13a
FRONT
Top Metal
Cross Bar
4
