11
Chapter 3
Part Names
1
AC IN terminal
Connect the included power cord. (
pages 4 to 7, 9)
2
Fuse
The fuse may break if something abnormal occurs to the
product. Contact us if the fuse breaks. (
page 15)
3
EX-VOL CONTROL terminal
Connect a SPEC preamplifier (separately sold). Use the
included mini plug connection cable for the connection.
(
page 15)
4
Speaker terminal (R (right) channel)
Speaker terminal (L (left) channel)
For a BTL connection, connect the minus (-) wire of the
speaker cord to the R (right) channel. (
pages 4 to 8)
5
Audio input terminals (LINE 1)
RCA type input terminal. (
pages 4 to 7, 9)
6
XLR input terminal (LINE2)
XLR type input terminal (female). (
pages 4 to 8)
7
GAIN selector switch
Switches the output gain of this product.
MAX : Switches the setting to the rated output.
-6 dB : Switches the setting to the rated output minus 6 dB.
EX-VOL: Set this when connecting a SPEC preamplifier.
8
Speaker selector switch
Switches the mode for the connection between this product
and the speakers.
STEREO : Set this for use with an ordinary stereo (driving
of both the L and R channels) connection.
(
page 4)
MONO
1
, MONO(BI-AMP) :
Set this to use this product as a mono
amplifier. Input the INPUTS to the L channel.
(
pages 5 to 6)
MONO BTL : Set this for a BTL connection (bridge connection).
Input the INPUTS to the L channel.
(
page 7)
9
INPUT selector switch
Switch the input terminals of this product.
LINE 1 : Set this when the device connected to this
product is connected to the RCA terminals.
LINE 2 : Set this when the device connected to this
product is connected to the RCA terminals.
LINE 2 (ATT) : Set this when the device connected to this
product is connected to LINE 2 (XLR terminals)
and you hear distortion due to, for example,
excessive input. This reduces the level of the
input signal by approximately 6 dB.
Rear panel
INPUTS
LINE
2
LINE
1
LINE
2(ATT)
SPEAKERS
INPUT
STEREO
MONO
MONO
(BI-AMP)
MONO 1
L
+
R
SPEAKERS
L
+
1
2
IMPEDANCE
4Ω
〜
16Ω
1
2
3
7
8
9
5
6
4
