■
Amplifier
2
6
3
9
5
7
8
4
1
1
DC IN terminals
Connect the amplifier to the power supply. (Using the
dedicated cables.)
2
SOUND MODE selector switch
Changes the sound quality. Set the sound quality as desired.
3
GAIN selector switch
Switches the output gain of this product.
MAX
: Select this setting when using a preamp. Switches
the setting to the rated output.
-6 dB
: Switches the setting to the rated output minus
6 dB.
SPEC-VOL : Select this setting when using the volume
controller (H-VC5).
4
SPEC-VOL CONT terminal
Connect the volume controller (H-VC5).
5
Speaker terminal
Connect the speakers. Always connect a speaker to terminal 1.
Connect speakers to terminal 1 and 2 in bi-amplifier operation.
6
INPUT selector switch
Switch the input terminals of this product.
LINE 1
: Set this when the device connected to this
product is connected to the RCA terminals.
LINE 2
: Set this when the device connected to this
product is connected to the XLR terminals.
LINE 2 (ATT) : Set this when the device connected to this
product is connected to LINE 2 (XLR terminals)
and you hear distortion due to, for example,
excessive input. This reduces the level of the
input signal by approximately 6 dB.
7
Audio input terminals (
pages 5 to 6)
LINE 1 : RCA-type input terminal.
LINE 2 : XLR-type input terminal (female).
8
Audio output terminals
LINE OUT outputs the input signal to the product unmodified.
9
SPEAKER selector switch
Switches the mode for the connection between this product
and the speakers.
1 : Select this setting when the product is used in a typical
connection. No sound will be output from the speaker 2
terminal. (
page 5)
1+2 : Sound will be output from both the speaker 1 and
speaker 2 terminals. Select this setting when using a bi-
amplifier connection. (
page 6)
11
Chapter 3
Part Names
