TWIGA FLEX
20
3. You will also need to measure the centres between the latches to ascertain
whether you have 1.0M or 1.1M centres, this will determine which way around you
mount the arms. Then set the adjustable arms to the nearest setting to match "L"
and at the correct width. The rear bolt holes in the arm allow you to set the pitch of
the arm to give you a higher or lower setting depending on the tractor.
4. Reverse tractor to the machine and
attach lower links. If the distance
between the rear wheels does not
allow for them to pass the brackets
you may require an optional set of
swinging bracket arms shown above
which fold in to allow the wheels to
pass.
5. With the P.T.O. and controls
mounted as described in the earlier
sections and with the arm at the rear
you can then raise the link arms to
bring the arms into the latches and fit
the locking pins. Raise to just above
the desired height then adjust and fit
the top link so that the machine sits
vertically, the swinging lower link pins
will allow for this. Lower the link arms,
the machine should sit at the desired
height with no weight on them.