Spearhead
Q15s, Q18s & Q21s
10
10
10
10
Setting Up & Adjustment
Setting Up & Adjustment
Setting Up & Adjustment
Setting Up & Adjustment
Height Adjustment
Height Adjustment
Height Adjustment
Height Adjustment
To achieve major adjustment to height of cut; reposition the two side plates attached
to the rear roller. A finer adjustment to cut can be achieved by lengthening or
shortening the top link of the tractor (Fig. 3).
Mechanical Offset
Mechanical Offset
Mechanical Offset
Mechanical Offset
The linkage ‘A’ frame (Fig. 4) can be slid along the tube to obtain numerous settings
from central to fully offset by simply slackening the clamping bolts, position the ‘A’
frame and re-tighten the bolts. Remember to regularly check that these bolts are
tight.
