ORBITAL
20
11.
Fit stabiliser yoke
to the tractor’s
top hitch bracket.
12.
Place the stabiliser tubes on to the frame
using the pins. Swing forward stabiliser bars
and attach to stabiliser yoke. Be sure the
stabiliser bars are free to slide. Do not fit
locking pins.
13.
Fit top link to machine and the tractor
14.
Lift the machine up on the tractor’s
hydraulics until both PTO stub shafts are
approximately in line. PTO angle may vary
between tractor makes - up to 17° above
horizontal is acceptable. Ensure there is enough
ground clearance below frame.
11a.
Make hydraulic connection to tractor
external spools for wheel undercarriage and
head slew. 2 double acting spools required.
bracket.
