Page 10.2 of 10.3 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
External electric wiring.
Bearings and seals
All service work, particularly filter changes, must be carried out in accordance with the manufacturer’s service
schedule. Failure to comply will invalidate the warranty. In the event of a claim, proof of the service work being
carried out may be required.
Repeat or additional repairs resulting from incorrect diagnosis or poor quality previous repair work are excluded
from warranty.
NB Warranty cover will be invalid if any non-genuine parts have been fitted or used. Use of non-genuine
parts may seriously affect the machine’s performance and safety. Spearhead Machinery cannot be held
responsible for any failures or safety implications that arise due to the use of non-genuine parts.
10.1.3 Remedies and procedures
The warranty is not effective unless the Selling Dealer registers the machine, via the Spearhead Machinery web
site and confirms the registration to the purchaser
by completing the confirmation form in the operator’s manual.
Any fault must be reported to an authorised Spearhead Machinery dealer as soon as it occurs. Continued use of
a machine, after a fault has occurred, can result in further component failure for which Spearhead Machinery
cannot be held liable.
Repairs should be undertaken within two days of the failure. Claims submitted for repairs undertaken more than
2 weeks after a failure has occurred, or 2 days after the parts were supplied will be rejected, unless the delay
has been authorised by Spearhead Machinery. Please note that failure by the customer to release the machine
for repair will not be accepted as a reason for delay in repair or submitting warranty claims.
All claims must be submitted, by an authorised Spearhead Machinery Service Dealer, within 30 days of the date
of repair.
Following examination of the claim and parts, Spearhead Machinery will pay, at their discretion, for any valid
claim the invoiced cost of any parts supplied by Spearhead Machinery and appropriate labour and mileage
allowances if applicable.
The submission of a claim is not a guarantee of payment.
Any decision reached by Spearhead Machinery is final.
10.1.4 Limitation of liability
Spearhead Machinery disclaims any express (except as set forth herein) and implied warranties with respect to
the goods including, but not limited to, merchantability and fitness for a particular purpose.
Spearhead Machinery makes no warranty as to the design, capability, capacity or suitability for use of the goods.
Except as provided herein, Spearhead Machinery shall have no liability or responsibility to the purchaser or any
other person or entity with respect to any liability, loss, or damage caused or alleged to be caused directly or
indirectly by the goods including, but not limited to, any indirect, special, consequential, or incidental damages
resulting from the use or operation of the goods or any breach of this warranty. Notwithstanding the above
limitations and warranties, the manufacturer’s liability hereunder for damages incurred by the purchaser or
others shall not exceed the price of the goods.
No action arising out of any claimed breach of this warranty or transactions under this warranty may be brought
more than one (1) year after the cause of the action has occurred.
10.1.5 Miscellaneous
Spearhead Machinery may waive compliance with any of the terms of this limited warranty, but no waiver of any
terms shall be deemed to be a waiver of any other term.
If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the
invalidity of such provision shall not invalidate any other provisions herein.
Applicable law may provide rights and benefits to the purchaser in addition to those provided herein.
