8999129: v1 11/09/2018
Page 5.6 of 5.6 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
5.5.2
Checking Head float
All Spearhead machines have head float fitted as standard. Head float allows the cutting unit to pitch fore - aft
around the lower link pins, smoothing out undulating ground. To check the head float operation, adjust the top
link to slacken off the transport strap and allow approximately 50.0 mm of play when the machine is lowered onto
the skids on a level surface, see Figure 5.7.
Figure 5.7
