MULTICUT 160/200
16
Important
On delivery of your machine check that the dealer has completed the P.D.I.
form ensure the warranty registration form is completed and returned.
Safety First
Never leave the tractor seat without first disengaging the PTO and stopping the
engine.
Ensure all rotating parts have stopped turning.
Never attempt any repairs, maintenance, service or any other checks with the
machine carried on the tractor hydraulics.
Always fully lower to the ground, or securely prop the machine on substantial
servicing stands.
Always replace all guards and retaining chains after servicing/maintenance is
completed.
It is imperative that the following checks are carried out in order not to invalidate your
warranty; these are carried out
before the first operation, after the first hour,
then
after 4 hours
. These checks are:
Wheel nuts and tyre pressure (50psi)
Gearbox bolts
Blade bolts are fully tightened and in particular the castle headed nut on the
blade rotor
Retaining bolts on the drive shaft
Grease all points
After the first 50 hours drain and replace the gearbox oil. Replace with EP90
Gear oil
It is your responsibility to maintain, to ensure a long reliable working life
Torque Settings
The Torque figures given below are recommended maximum settings only.
Size:
Tensile strength:
Description:
Torque setting:
Nm
M16 8.8
Gearbox
bolts
280
M16 8.8
Blade
carriers
280
M24 8.8
Blade
bolts
950
