19
AFTER SALES SUPPORT
0345 605 2067
MAINTENANCE AND REPAIR
WARNING!
Always switch the product off and
let the product cool down before performing
inspection, maintenance and cleaning work!
WARNING!
Wear safety gloves when working
on the cutting blades and close to it!
IMPORTANT!
The tool is fitted with four tine
wheels (blades) that can easily be changed in
pairs. Both of the tine wheel pairs can be fitted
on the left or right, as required. Purchase the
blades from authorised service center.
WARNING!
Make sure that the blades (d) are
set to their proper turning direction. The arrows
on the gearbox and blades should point the
same way.
General
■
Clean the product with a slightly damp cloth and pH-neutral
soap. Use a brush for areas that are hard to reach.
■
In particular clean the air vents after every use with a cloth
and brush.
■
Remove stubborn dirt with high pressure air (max. 3 bar).
■
Check for worn or damaged parts. Replace worn parts as
necessary or contact an authorised service centre for repair
before using the product again.
■
Regularly check for obvious defects such as loose,
dislodged or damaged cutting devices, loose fixings and
worn or damaged components.
■
Check that safety guard are undamaged and correctly fitted.
Carry out necessary maintenance or repairs before using the
product.
