The Tank Pressure Gauge supplies the reading of the air pressure inside the tank.
Pressure Gauges
NOTE. If you do not allow the air to discharge whilst you are setting the regulator, the pressure
as indicated on the regulated outlet gauge will be incorrect.
This gauge ONLY indicates the correct pressure while air is being discharged from the
outlet.
This compressor is fitted with an Air Pressure Regulator. It allows regulation of the output air
pressure.
Some air tools require a higher operating pressure than others. Please refer to the air pressure
requirements of your tools for the proper settings for the regulator.
Pressure Regulator
The compressor is equipped with a safety valve that will engage when the pressure in the
tank exceeds the maximum pressure setting, releasing any excess built up.
DO NOT REMOVE OR ATTEMPT TO ADJUST THE SAFETY VALVE.
Safety Switch
Safety Valve
Compressor Set Up
8
