23
AFTER SALES SUPPORT
0345 605 2067
ASSEMBLE
Plant protector assemble
Charging the battery
4
5
i. Assemble the plant protector into the slot in between
the guard and the motor housing.
ii. Align the front handle to the support and place it onto it.
iii. Insert the bolt from the right through the opening.
Ensure that the bolt head sits properly in the recessed
shape in the support then tighten the knob.
NOTE:
This battery pack has been shipped in a low
charge condition. It should be fully charged before first
use. Make sure the main voltage is the same as rating
label which located on the charger.
WARNING!
The charger and battery pack are specifically designed
to work together so do not attempt to use any other
devices. Never insert or allow metallic objects into your
charger or battery pack connections because an electrical
failure and hazard will occur.
The battery needs to be charged before first use and
whenever it fails to produce sufficient power on jobs that
were easily done before.
