19
of 25
V2:03/21
AFTER SALES SUPPORT
0345 605 2067
OPERATION
Raking work
Raking work is run with raking cylinder with fine needles,you
can adjust the working depth by depth adjustment lever
accordingly. In order that a healthy lawn can develop in the
spring, it is necessary for greater amounts of air to penetrate
the area around the roots of the grass. We recommend raking
your lawn every 4 - 6 weeks depending on the state of your
lawn.
NOTE:
Overload protection
The overload protection will be activated in the
following circumstances:
1). A build up of scarified material around cutting
device.
2). If the material scarified is larger then motor
capacity.
3). Where there is too much resistance against
the cutting device.
When the circuit breaker has been activated
switch off the product and disconnect from the
power supply.
Let the product cool down eliminate cause and
wait for 5 minutes before using the product
again.
4