Spear & Jackson S1432ESC Original Instructions Manual Download Page 10

10

AFTER SALES SUPPORT 

0345 605 2067   

of 25

V2:03/21

Please read these instructions fully before operating or maintaining your machine

SAFETY INFORMATION

f)   Keep cutting tools sharp 

and clean.

    Properly maintained 

cutting tools with sharp 

cutting edges are less 

likely to bind and are 

easier to control.

g)  Use the power tool, 

accessories and tool bits 

etc. in accordance with 

these instructions, taking 

into account the working 

conditions and the work 

to be performed.

    Use of the power tool for 

operations different from 

those intended could 

result in a hazardous 

situation.

Intended use

This product is not 

intended for use by persons 

(including children) with 

reduced physical, sensory 

or mental capabilities, or 

lack of experience and 

knowledge, unless they have 

been given supervision or 

instruction concerning use 

of the product by a person 

responsible for their safety.
Children should be 

supervised ensuring that they 

do not play with the product.
1). This scarifier and raker is 

designated with a rated 

input of 1400 Watts. 

Depending on the fitted 

cutting device this product 

it is either intended for 

scarifying and removing 

thatch from lawns or for 

raking in domestic and 

hobby gardens.

2). When used as a scarifier, 

this product works by 

scratching through and 

between the grass with 

specially adapted prongs 

that collect and remove 

any unwanted parts from 

the lawn whilst leaving the 

grass blades intact.

    At the same time the 

product scarifies the 

ground resulting in a 

better airing.

Summary of Contents for S1432ESC


























Reviews: