9
AFTER SALES SUPPORT
0345 605 2067
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
feet and hands from the
cutting means.
■
Before use check the
controls and proper use of
the product.
■
Before using the product
and after any impact, check
for signs of wear or damage
and repair as necessary.
■
Always disconnect the
product from the power
supply (i.e. remove the plug
from the power supply or
the battery pack)
– whenever leaving the
product unattended;
– before clearing a blockage;
– before checking, cleaning
or working on the product
– after striking a foreign
object;
– whenever the product
starts vibrating abnormally.
■
Take care against injury to
feet and hands from the
cutting attachment.
■
Switch on the motor only
when the hands and feet
are away from the cutting
means.
■
Always ensure that the
air vents are kept clear of
debris.
■
After extending new
cutter line always return
the product to its normal
operating position before
switching on.
■
Never fit metal cutting
elements.
■
Never replace non-metallic
cutting means with metallic
cutting means.
■
Never use replacement
parts or accessories not
provided or recommended
by the manufacturer.
■
The product should be
supplied via a residual
current device (RCD) with a
tripping current of not more
than 30 mA.
■
Avoid using the product
in bad weather conditions
especially when there is a
risk of lightning.
■
Position the cord so that it
will not be caught by the
cutting attachment during
operation.
