Step 3
You can touch the screen to adjust the angle automatically. If it is too loose,
you can tighten the nuts by wrench as the below drawing shown
.
Figure 5
3
PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TV MOUNTS
TO THE BACK PANEL OF TV IN STEP 2 . MAKE SURE THE APPROPRIATE
MOUNT HARDWARE IS BEING USED PROPERLY .
1. Select correct Mounting Hardware according to the screw hole size of your TV,
discard any remaining screws or spacers.
2. Carefully lay your TV on its face on a non-abrasivesurface, making sure to lay
padding underneath it so as not to damage the screen .
3. Place left TV mount and right mount in the approriate position, making sure
CENTERED on the back of the TV and LEVEL with on another .
4.This product only install on the perpendicular wall,not install on the ceiling.
