b) Electrical safety
•
Never pour liquids over electrical devices or place objects filled with liquid next to the product.
If liquid or an object does enter the interior of the device, power down the respective socket
(e.g. switch off the circuit breaker) and remove the mains plug from the mains socket.
Discontinue use and take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. The mains adapter may also
generate a fatal electric shock!
• Allow the product to reach room temperature before connecting it and putting it to use. This
may take several hours.
• Do not touch the mains adapter if there are any signs of damage, as this may cause a fatal
electric shock! Switch off the mains voltage to the socket containing the power adapter (switch
off at the corresponding circuit breaker or remove the safety fuse, and then switch off at
the corresponding RCD protective switch). You can then unplug the mains adapter from the
mains socket. Dispose of the faulty mains adapter in an environmentally friendly manner and
discontinue use. Replace it with a power adapter of the same design.
• The mains outlet must be located near to the device and be easily accessible.
• Only power the product using the mains adapter provided.
• Only connect the power adapter to a standard mains socket connected to the public grid.
Before plugging in the power adapter, check whether the voltage stated on the power adapter
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the mains adapter from the mains socket by pulling on the cable; always use
the grips on the plug.
• When setting up the product, make sure that the cables are not pinched, kinked or damaged
by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This may
cause an injury.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
• Avoid exposing the product to electrical discharges (ESD), as this may damage the interior
components.
Product overview
Transmitter
1
2
3
1 USB-C™ connection plug
2
LED indicator (wireless connection)
3
LED indicator (power supply)
HDMI receiver module
6
7
8
5
4
4
DC 5 V
power-in socket (5 V/DC power supply)
5
LED indicator (wireless connection)
6
LED indicator (data transmission)
7 HDMI output (OUTPUT)
8 Antenna input
Installation location and range
• This product transmits an HDMI-compatible video signal wirelessly. The signal is transmitted over the
5 GHz frequency band.
• Do not position the devices in a place where objects, devices, walls, glass or people are in between the
transmitter and HDMI receiver module, as this will significantly reduce the range.
•
Different objects have a different impact on the range, therefore no specific range can be guaranteed. Try
changing the location and orientation of the transmitter and HDMI receiver module. If necessary, move
the devices closer together. For example, you can use a long (high-quality) HDMI cable to connect the
HDMI receiver module to the display device. This will give you greater flexibility when positioning the HDMI
receiver module.
• Use suitable padding to protect the surfaces of valuable furniture against pressure marks, scratches and
stains.
Setup and installation
• Plug the transmitter into a USB-C™ port on a suitable video signal source.
• Screw the antenna onto the thread on the antenna input (8) and position the antenna in a vertical
orientation.
•
Remove the protective film on the top of the HDMI receiver module.
• You can place the HDMI receiver module on a level surface.
Operation
a) Connection diagram
• Connect all components according to the connection diagram in section b ("Connection diagram"). You will
also need an HDMI cable to connect the display to the HDMI receiver module.
• Connect the transmitter to a suitable video signal source (e.g. mobile device) with a USB-C™ port.
• Use an HDMI cable (not included) to connect the HDMI output (7) on the HDMI receiver module to the
HDMI input on a suitable HDMI display device.
• The LED indicator (5) will turn on. This indicates that the device's power supply is working.
• You can now connect the power supply. Insert the low-voltage plug on the power adapter into the
DC 5V
power-in socket (4).
The (5) and (6) LED indicators on the HDMI receiver module will turn on. This
indicates that the device's power supply is working.
Operating instructions
USB-C™ Wireless stick
Item no. 1713857
Intended use
This product is designed to transmit an HDMI video signal wirelessly. In ideal conditions, it increases the
range between the HDMI source and your HD display to up to 30 m. The wireless stick transmits HDMI video
signals wirelessly (with a resolution of up to 1080p@50/60 Hz) from a playback device (e.g. mobile device
or computer) to an HDMI reception device. It connects to a display via an HDMI cable (not included). The
transmitter is powered via the USB-C™ port (bus powered). The HDMI receiver module is powered by the
power adapter provided.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in bathrooms)
must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper use can cause
hazards such as a short circuit, fire or electric shock. Read the instructions carefully and store them in a safe
place. Only make this product available to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and product names are
trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Package contents
• Transmitter with USB-C™ plug
• HDMI receiver module
• Antenna
• Power adapter
• Operating instructions
Up-to-date operating Instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the QR code shown.
Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to
an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the product.
This symbol indicates that this product is built according to protection class II. It is equipped with
reinforced or dual insulation between the mains circuit and the output voltage.
The product must only be installed and used in dry, indoor locations. It must not become damp
or wet, as this may cause a fatal electric shock!
Safety information
Read the operating instructions and safety information carefully. If you do not follow the
safety information and information on proper handling in these operating instructions,
we will assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe safety and operating instructions of any other devices which are connected
to the product.
• Consult a technician if you are not sure how to use or connect the product, or if you have
concerns about safety.
•
Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
• If you have any questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
