•
Do not overload the card terminal stand. Refer to the maximum card terminal weight/
size stated by the manufacturer.
•
Do not hold onto the card terminal stand or use it to support yourself.
•
Do not secure any objects to the card terminal stand other than a card terminal.
•
If you are in any doubt, do not install the stand yourself; ask a qualified technician to do it
for you.
•
Card terminals generate heat. Fire hazard! Take appropriate precautions to ensure
heat dissipation and prevent the risk of a fire.
Certain surfaces may be damaged or
discoloured due to heat dissipation. Take appropriate protective measures.
Care and cleaning
•
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the housing or cause the product to malfunction.
•
Use a dry, lint-free cloth to clean the product.
Important information
General safety instructions for card terminal stands
Dear customer,
Card terminal stands provide a better operation at the card terminal. If the stand is mounted at
a fixed position the card terminal is always situated at the desired location.
Depending on the model, the card terminal height and position can be adjusted and you can
rotate/turn the card terminal to suit your needs.
There are a few important safety instructions which must be observed during installation, so
please read the following sections carefully.
General information
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material unattended, as it may become a dangerous toy for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity
and moisture.
•
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, stop using it and prevent unauthorized
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
•
Always handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
•
Check the contents of the packaging before assembling the product. Do not assemble the
product if any parts are missing.
•
Depending on the design, the card terminal stand can be fixed to an even surface (e.g. table)
or simply placed on an even surface.
•
Card terminal stands which are to be placed on a table, existing rubber feet may produce
scratch marks on sensitive surfaces. Protect such surfaces using a suitable mat.
•
The product may move when it is placed on a surface/table, even if it has rubber feet. You
may need to use a self-adhesive strip to prevent slipping.
•
Installing the product in an unsuitable location may lead to personal injury or damage to
property!
•
The card terminal stand is only designed for use in sheltered indoor spaces, unless otherwise
stated.
•
Plan the mounting location carefully so that the card terminal stand will be located in the
desired position once you have finished mounting it.
•
Proceed with care when assembling and installing the product. The product has sharp edges
which have the potential to cause injury!
•
Only carry out the work necessary to mount (or adjust) the card terminal stand. Never attempt
to dismantle, convert or repair the card terminal stand.
•
Before beginning the installation process, check that your card terminal is suitable to fit on the
card terminal stand. If not, consult a technician for advice.
•
Work on a clean, soft and dry surface. Protect valuable furniture using a suitable pad or cloth.
•
Ensure that you use the correct screws when fixing the stand in place. The screws for
the card terminal stand are usually included, but you may need to purchase other screws
(depending on the product).
•
Do not attach the stand to unsuitable floor surfaces. Thin or laminate flooring is normally
unsuitable. However, special parts are sometimes available for these types of surfaces. If in
doubt, contact a specialist before assembling the product.
•
Do not use any force when tightening screws, otherwise you may damage the card terminal
stand and void the warranty!
•
Carefully mount/place the product according to the instructions, otherwise the card terminal
stand may cause injury or damage to property if it falls off the installation surface.
•
Ensure that no unauthorized persons are present when mounting the product.
•
Ensure that no cables or wires are damaged when drilling holes or tightening screws.
Accidentally drilling into electrical cables can cause a fatal electric shock!
Use appropriate safety measures when using electric tools (e.g. a drill). Wear safety goggles.
•
When laying cables, ensure that they do not get jammed or bent in the card terminal stand.
•
Check regularly that all of the screws/clamps are securely in place (latest every 3 months).
The screws may become loose over time as the card terminal stand is adjusted/moved
around.
•
Do not overtighten the screws. This may damage the threads and reduce the strength of
the fitting.
•
Do not use any force when moving/adjusting the card terminal/card terminal stand, otherwise
you may damage the card terminal.
This document is published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*card_terminal_stand_V1_0420_02_hs_4L
