Spatz SDI-X164 Operation Manual Download Page 2

   

DISCLAIMERS

 

The information in this manual has been carefully checked and

 

is believed to be accurate. SPATZ assumes no responsibility for any 
infringements of patents or other rights of third parties which may 
result from its use.

 

SPATZ assumes no responsibility for any inaccuracies that may be 
contained in this document. SPATZ also makes no

 

commitment to update or to keep current the information contained 
in this document.

 

SPATZ reserves the right to make improvements to this document 
and/or product at any time and without notice.

 

 

 

COPYRIGHT NOTICE

 

No part of this document may be reproduced, transmitted, 
transcribed, stored in a retrieval system, or any of its part translated 
into any language or computer file, in any form or by any means— 
electronic, mechanical, magnetic, optical, chemical, manual, or 
otherwise—without express written permission and consent from 
SPATZ Technology.

 

© Copyright 2012 by SPATZ.    All Rights 
Reserved.

 

Version 1.1 January 2012

 

 

 

TRADEMARK ACKNOWLEDGMENTS

 

All products or service names mentioned in this document may be 
trademarks of the companies with which they are associated.

 

Summary of Contents for SDI-X164












Reviews: