USER’S MANUAL
EN
9
harmonized standards:
EN 60974-1
Arc Welding Equipment
– Part 1: Welding Power Sources
EN 60974-10
Arc Welding Equipment
– Part 10: Electromagnetic Compatibility
Requirements
4.1 CE MARKING
CE
marking is placed on the nameplate of device and/or on the front panel of device.
4.2 RATING PLATE
Rating plate and serial number are located on the bottom of the device case.
5. GENERAL DESCRIPTION
SPARTUS® EasyCUT 40E / 40E Compressor
These are small size inverter plasma cutter. Designed for cutting metals and other electrically
conductive materials, powered with single phase 230V source power.
Through the use of modern technology, we were able to get a light and compact plasma cutter
with maximum power of 40 amps, which a maximum cutting thickness equals 25mm.
Cut 40E has a simple-to-use function panel with adjustment knob which gives ability to adjust
the cutting power between 20 – 40 amps. Device’s front panel is equipped with a SK socket and
the plasma torch socket.
Cutters are equipped with a pressure reducer with air filter which is mounted at the rear of the ca-
sing, in a place specially designed for that purpose
(protection against damage eg. during the move)
.
CUT 40E device has a lot of modern solutions to support the process of plasma cutting and
functioning of the device. Built-in system of contactless pilot arc ignition without HF – provides
excellent quality of cutting edge and longer life of consumables.
SPARTUS® EasyCUT 40E Compressor cutter has been additionally equipped with a built-in com-
pressor, which made it possible to work in the field. Changing the compressed air supply can be
done by a switch on the front panel. An integrated internal compressor supplies the compressed
air necessary to produce a plasma arc.
Examples of use: workshop, portable repair, production.
5.1 PURPOSE OF USE
SPARTUS® EasyCUT 40E / 40E Compressor plasma cutters are designed for thermal cutting
(plas-
ma cutting)
steels and any other nonferrous metal and other electrically conductive materials.
6. TECHNICAL SPECIFICATIONS
6.1 OPERATION, STORAGE AND TRANSPORT
Conditions during operation, storage and transport
Range of ambient air temperature
during operation
-10°C to +40°C
Relative humidity of the air
up to 50% at +40°C
up to 90% at +20°C
