Revised Date: 2017/08/24
3
Operation
User Mode Operation
The first tier of operation includes the following settings as Figure 2. To operate:
1.
Power switch “ON” or “OFF” to start/ stop the System;
2.
After switching “ON”, press any button to start the User Mode operation.
i.
Press “MODE” button to switch over different program modes.
ii.
Press UP/ DOWN button to increase/ decrease or rotate the values of setting.
iii.
Press “
℃
/
℉
” button to toggle between
℉
and
℃ scale
.
iv.
Press “SET” button to set current time-date. When SET is pressed for more than 3 seconds, users can
set the temperature setpoint schedules
.
3.
It will return to normal display with the latest setting if there’s no button pressed for 10 seconds.
#
Item
Description
Remarks
1
Normal Display
Display Current Room or Set-Point
Temperature and Current Time-Day.
Setting “-SP- “Parameter in
Engineer Table to Choose Current
Room or Set-Point Temperature.
2
Temperature Setting
View Current Set Point or Set the
Required Temperature
3
Mode Select
1. Select the Working Mode:
(1) Run/ Halt/ Stop for Schedule
RUN: Run Schedules.
HALT: Pause “Current” Schedule
and Use Manual SP.
STOP: Stop Using All Schedules
and Use Manual SP.
4
℃
/
℉
1. It will toggle the Unit of Temperature
to change between
℉
and
℃
.
5
Time/ Date/ Schedule
Setting
SET
1. Set Current Time in 12- Or 24- Hour
Format;
2. Set Calendar and Day of Week;
3. When SET Is Pressed for More Than
3 Seconds, Users Can Set
Temperature Set Point Schedules
Press SET to Continue Settings.
Press MODE, Or POWER Button to
Escape Any Time During Setting.
