13
6. Handlebar and Computer Installation
Remove two M8x15 Hexagon Socket Pan Head Cap Bolts (33) and two Ø16xØ8x1.5 Curve
Washers (34) from the Front Post (47). Remove bolts with the S6 Allen Wrench provided.
Insert the Hand Pulse Sensor with Wires (32) through into the hole on the Front Post (47)
and pull them out from the top end of the Front Post (47).
Attach the Handlebar (37) onto the Front Post (47) with two M8x15 Hexagon Socket Pan
Head Cap Bolts (33) and two Ø16xØ8x1.5 Curve Washers (34) that were removed.
Tighten bolts with the S6 Allen Wrench provided.
Remove four M5x10 Cross Recessed Pan Head Bolts (40) from the back of the Computer
(38). Remove bolts with the Multi Hex Tool with Phillips Screwdriver provided.
Connect the Hand Pulse Sensor Wires (32) and Extension Sensor Wire (39) to the wires that
come from the Computer (38). Tuck wires into the Front Post (47). Attach the
Computer (38) onto the top end of the Front Post (47) with f four M5x10 Cross Recessed
Pan Head Bolts (40) that were removed. Tighten bolts with the Multi Hex Tool with Phillips
Screwdriver provided.
Allen Wrench S6
Tools:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Summary of Contents for MAGNETIC 997
Page 7: ...6 OVERVIEW DRAWING...
