Ethernet Adaptor 01-103
Sparr Electronics Ltd., Bangalore
6
5
Programming through Hyper Terminal, Telnet and Web Browser
You can configure the EAD01-103 in three possible ways. They are described in detail as
below.
5.1. Programming through Hyper Terminal
5.1.1. Serial Port Login & Programming of EAD01-103 Parameters.
1
Use any Communication Program like Hyper Terminal, XTalk, and Mirror etc to
configure EAD01-103 through RS 232 Serial Interface. The Serial port settings should be
set to 9600 bps, 8 data bits, No Parity, 1 Stop bit with Flow control option selected as
none. Select appropriate Communication (COM) port to which the EAD is connected in
the software.
2
To enter the
Configuration Mode
, Remove the RJ45 LAN Jack and power ON the
EAD. You will get a Message in the Hyper Terminal “
Network Error, Press Enter for
Configuration...Waiting 12.5 Sec....
Press Enter Key to proceed with the Configuration.
3
Once the EAD senses the Enter key, the unit will first send the following string which
will appear on Screen:
Enter configuration password
:
Enter the default Password, that is 77277.
(If the password entered is wrong, then the EAD will prompt you to re-enter Correct
Password for three times. If all the three attempts fail then you will have to follow step 2
in getting the option to enter a password again. If you are still not successful, please do
call us for resetting of Password with Master Password from Factory).
