Ethernet Adaptor 01-103
Sparr Electronics Ltd., Bangalore
11
Whenever click on SERIAL or Next which is marked in figure 11, it will display serial
configuration page (figure.12).using this we can configure Baud rate, Data bits, Parity,
stop bits, flow control, Serial I/F Mode, Character wait time out, Inter character delay,
connection status reporting and XON-XOFF pass through. All these parameters are
explained in Section 7.2.
Figure. 12
.
EAD01-103 SERIAL configuration page in browser
Click on SERVER or Next which is marked in figure 12, to view the server configuration
page (figure.13).This page is used to configure the server parameters IP Filtering, start
Mode, Accept incoming connection, Remote IP address, Remote Port Number, Send CR
with LF, Accept serial data when not connoted, No of characters in packet, connection
inactive timeout, Disconnect active connection on data, Disconnect active connection on
DSR, DTR active on connect only, Defeat long ACK, Restart on loss of link , Telnet IAC
and packet data. All these parameters are explained in Section 7.3.
