Ausgabe 2011
ENGLISH 13
Unit installation
Install the compressor on a level surface in a well-ventilated room with adequate space.
Room temperature should not exceed 35°C.
1. Open the upper part of the case. This contains the pressure regulator
with water separator, spiral hose, connection hose and the airbrush holders (not illustrated).
2. Connect the pressure regulator to the compressor using the spiral hose and attach the
pressure regulator to the edge of the opened upper part of the case (illustration on page 9, item 4)
3. Attached the required airbrush holder(s) to the edge of the opened upper part of
the case (not illustrated)
4. Connect the compressor to the airbrush instrument using the hose.
5. To connect a second instrument, remove the plug screw on the pressure regulator
and screw in a second hose
2
2
4
4
