HP10 Series 1-Phase
AC EV Charging Station
User Manual
- 8 -
2.5.
Maintenance
▷
It is strictly prohibited to use the charging station when the charging adapter
or charging cables are defective, cracked, worn, broken or the charging cables
is exposed. If you find any, please contact the supplier in time.
▷
EV can only be charged with the engine off and stationary.
▷
Do not charge in rainy and thunderous weather.
Personnel must always use protective footwear when maintenance work.
Caution ESD to avoid damaging electronic devices, especially to
protect microchips on PCBA.
▷
Accessory replacement must be done by qualified personnel, thrums or metals
are prohibited to be left in the controller; otherwise, hazardous blast and
fire may result.
▷
After replacing main PCBA, parameters must be adjusted and matched before
operation; otherwise, property loss may result.
▷
It is recommended that routine safety inspection visits to charging station
be conducted at least once a week.
▷
Keep the charging connector clean and dry and wipe with a clean, dry cloth if
soiled.
