6
GR 3,6Li
EN
VII - Operation
LED WORK AREA LIGHT
The screwdriver has LED light (I) to illuminate the work
area and improve vision when drilling in areas with insuf-
ficient light.
Max. radiant power: < 2mW
Wavelength: 400-700nm
EN 60825-1: 1994+A1:2002+A2:2001
LED RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LED PRODUCT
FORWARD / REVERSE SWITCH
1. Forward/reverse switch (
Fig. 3, C
) – set right to clock
-
wise rotation.
2. Forward/reverse switch (
Fig. 3, D
) – set left to counter
clockwise rotation.
Press on switch (A), to drive/install fasteners or to re
-
move fasteners.
INSERTING AND REMOVING
SCREWDRIVER BITS
1. To install, insert screwdriver bit (6 mm hex) into bit
holder (C), of tool.
2. To remove, firmly grasp bit and pull out of bit holder.
WARNING:
Always set switch to off position
when installing and removing bits.
LOCKING THE SCREWDRIVER
The screwdriver is fitted with an automatic spindle lock
feature. When the screwdriver is locked, it is possible to
use it as a manual tool.
VIII - Maintenance
CLEANING
▪ With the motor running, blow dirt and dust out of all air
vents with dry air at least once a week. Wear safety
glasses while performing this.
▪ Exterior plastic parts may be cleaned with a damp
cloth and mild detergent.
WARNING:
Although exterior plastic parts
are highly solvent resistant, NEVER use solvents.
Charger Cleaning Instructions
▪ Dirt and grease may be removed from the exterior of
the charger using a cloth or soft non-metallic brush.
Do not use water or any cleaning solutions.
WARNING:
Disconnect the charger from the
AC outlet before cleaning.
WARNING.
To assure product safety and reli-
ability, repairs, maintenance and adjustment (includ
-
ing brush inspection and replacement) should be per
-
formed by certified service centres or other qualified
service organisations, always using identical replace-
ment parts.
ACCESSORIES
Recommended accessories for use with your tool are
available at extra cost from your local SPARKY service
centre.
IX - Environmental Protection
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
For EU-countries only:
Do not dispose of the power tool into household
waste!
According to the guidelines 91/157/EEC, power
tools, which are not usable, should be recycled.
Batteries:
Do not dispose of the power tool or the battery into
household waste, fire or water.
All type of batteries
should be sorted for environmental-friendly recycling or
destroyed.
For EU-countries only:
Defective or worn out batteries must be recycled accord-
ing to the guidelines 91/157/EEC.
To remove the battery from the machine, make sure that
the battery is fully discharged. Unscrew the screws on
the casing and take off the casing shell. Disconnect the
connections at the battery and take out the battery.
pages-GR3.6Li-2012.indd 6
17.5.2012 г. 09:38:57 ч.
