4
2. Hardware Installation
2.1 Connect the Adapter to your Laptop / Desktop
The WCM-110 designed to be powered by the USB interface of your
laptop/desktop. When the laptop/desktop is turned on, the USB interface is able to
provide 5V DC power output except data transmission. This is enough to drive the
WCM-110.
Please refer to the following figure for hardware installation.
2.2 LED Indicators
The WCM-110 comes with Link, Activity, and Power LED indicators. Refer to the
table below for LED definitions:
LED
Color
Status
Definition
Link Red On
Off
The device is connected to an Ethernet network.
The device is off or there is no Ethernet connection.
Activity Blue On
Off
The device is on and ready.
The device is off.
Power Orange
On
Off
The device is on and ready.
The device is off or performing boot sequence.
RJ-45
RJ-45
Power
USB
