HOW TO CHARGE A MOBILE DEVICE WITH GO WARMER:
1. Press Power Button once to turn on charging function (indicator lights will light
up blue). Make sure that the device is suitable for use with Go Warmer. It is
recommended to only use the USB cable that came with your mobile device.
2. Plug the Output (large) end of the USB cable into the USB output on Go
Warmer and then plug the Input (small) end of the USB cable into the USB
input end of your mobile device.
3. The device will begin to charge automatically. The Battery/Temperature
Indicator Lights will light up blue to indicate the charging process.
GO WARMER USAGE TIMES AND TEMPERATURE
Distributed by:
Fairfield, NJ 07004
©2019 Spark Innovators Corp.
Battery type: Lithium Ion Rechargeable Cell; 18650; 2000 mAh
Voltage: 3.7V
SAFE BATTERY DISPOSAL
• Failure to follow all instructions may result in electric
shock, fire and/or serious injury.
• Do not dispose of batteries in the garbage. Disposal of batteries in
the garbage is unlawful in the United States, under state and
federal environmental laws and regulations.
• All rechargeable batteries will degrade over time, eventually limiting
the battery’s ability to retain a charge. This unit contains a lithium ion
rechargeable battery pack, which must be disposed of properly when
it will not longer retain a charge.
• Do not expose battery to intense
heat or dispose of in a fire as this
might result in an explosion.
• Do not expose to intense sunlight
or temperatures above 120˚F (49˚C).
• Do not expose to moisture or
submerge in liquid.
LOW
MED
HIGH
86F (30C) – 7hrs
100F (37C) – 3-4hrs
120F (50C) – 2.5hrs
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harm-
ful interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this device
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
go warmer instructions 8.5x5 flashlight.qxp_Layout 1 10/28/20 11:16 AM Page 2