Spark modern fires LBS-OD 24, Owner'S Operation And Installation Manual, Page: 4 / 20

4
Maintain minimum 0.25" gap
around appliance and pilot.
Minimum 0.75" lip to
support appliance.
Non-combustible materials
only (complete structure).
Allow for air flow
from below
NOTE:
Linear Burner System can be installed on any
non-combustible materials. Above example is
Clearances to combustibles must be
maintained (see page 3).
not a requirement.
Cover
(see Illustrated Parts List, page 13)
must be in place when appliance is not in use.
( min. 12 Sq. In. per
linear foot of burner).
Secure burner
to base here
LINEAR BURNER SYSTEM OUTDOOR
I
NSTALLATION (EXAMPLE)
IMPORTANT: LBS-OD 96 models must have the burner system
secured to the base in order to avoid warpage of the appliance!