THERMAL OVERLOAD PROTECTION (Circuit Breaker)
The thermal overload protection (circuit breaker) will shut off and stop
the machine automatically. If this occurs, please turn off the mixer and reduce
the size of the batch.
After waiting one minute, reset the circuit breaker (push in) and turn on
the mixer. If mixers stop again, reduce the batch further. If this happens with
an extremely small/light batch, please contact the nearest authorized service
agent for further information.
CARE OF YOUR MIXER
The mixer is designed for minimum user maintenance. It may be necessary from time to time to apply a
little oil to the rods on which the bowl cradle slides. If so, use a little food quality lubricant, ensuring that
there is no excess oil that could contaminate the food mix.
Water jet cleaning is not allowed. Clean the mixer thoroughly after use. The body should be wiped
down with a damp cloth after first isolating the machine from the electricity supply.
Do not spray the
machine with or immerse it in water.
Do not forget to clean the rear of the machine and
do not allow the
rear vents to become blocked as this may result in overheating.
Pay particular attention to the bowl pins and any surrounding areas of the cradle to prevent a buildup of
mix as this could prevent incorrect location of the bowl. For the same reason, ensure that the beater shaft and
each of the sockets on the tools are cleaned thoroughly. The bowl and tools should be washed in hot soapy
water, rinsed and dried before being put into storage.
Do not wash the tools in a dishwasher as the
polished finish will be adversely affected by the dishwashing chemicals.
MAINTENANCE
Regular maintenance is necessary on all machines if they are to remain in good working order. It is
strongly recommended that this be carried out by trained technicians from a SPAR appointed distributor.
GEARBOX LUBRICANT
Please refill the lubricant inside the gearbox every 5 years. We recommended that this servicing or
maintenance work must be carried out by trained technicians from a SPAR appointed distributor.
CAUTION:
Please use either Mobil lubricant “XHP 222” or Brugarolas “GRASA AGUILA PLEX
2-BOLSA” to refill the gearbox.
PLANETARY UNIT LUBRICANT
In case there is a strange noise coming from the planetary unit, please reapply grease to the planetary
unit. We recommended that this servicing or maintenance work must be carried out by trained technicians
from a SPAR appointed distributor.
CAUTION:
Please use TACBECON grease “DGK-100” to lubricate the planetary unit.
