10
district. The unit will send SMS to the central number when it detects alarm.
Remark: 0 represents close alarm; 1 represents out fence alarm; 2
represents enter fence alarm.
6.8.2.1 Set Up:
Send SMS“
spspace+semi-dspace+alarm type
” to
unit to set the restricted district. In case of breach, it will send SMS
“stgeo-info” to the central number.
For example: send SMS “stockade123456 500 1” stands for based on device
current coordinates as center, 500 is semi-diameter, set 1 as out fence alarm
type.
6.8.2.2Cancel: Send SMS “
nospassword
” to deactivate this function.
6.8.3
Overspeed alarm
Set up: Send SMS “
speed+pspace+80
” to the unit(suppose the speed
is 80km/h),and it will reply “speed OK!”. When the target moves exceeding
80km/h.the unit will send SMS “speed+Geo-info” to the central number.
Cancel: Send SMS “
speed+pspace+0
” to deactivate the overspeed
alarm.
Remark: It is recommended that the speed alarm is set at not less than
30km/h.For below that rate; it may cause the excursion of the GPS signal
influenced by clouds etc.
6.8.4
ACC working alarm
1) To active this functions, send "
ACC+pSpace+1
" to tracker, it will
