14
ID# M867SF12
08/06
7
PLA
YING
SURF
ACE
1
25
24
14.
1
18
Upright pole (1) by tightening nut (18).
Using 15/16” wrench, turn nut (18) clockwise to
begin standing pole upright. Continue to turn nut (18)
until pole has come to rest against washers (24) and
pole is vertical.
Once pole is in its final position, install washers (24)
and nuts (25) onto J-bolts (19) and fully tighten to
secure pole to base plate
THREE PEOPLE REQUIRED FOR THIS
PROCEDURE.: TWO PEOPLE ARE REQUIRED TO
GUIDE AND SUPPORT THE SYSTEM WHILE THE
THIRD PERSON IS TIGHTENING NUT (25) TO
RAISE THE SYSTEM UPRIGHT.
FAILURE TO FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!
24
