12
ID# M6611742
07/08
3.
While maintaining alignment of dimple and trough, bounce top and middle pole
assembly (9 and 10) onto bottom pole section (11) using a wood scrap as
shown. Bounce until the top and middle pole assembly (9 and 10) is aligned
with the marked line on the bottom pole (11).
You should have a 3 1/2” (8,9 cm) of overlap when properly assembled.
10
9
11
MARKED LINE
11
MIDDLE POLE
10
HOLE
IMPORTANT!
Align dimple of middle pole section (10) into
trough of bottom pole section (11) as shown.
MIDDLE POLE
TOP POLE
BOTTOM POLE
BOTTOM POLE
MARK LINE
3 1/2”
(8,9 cm)
CAUTION!
WHEN PROPERLY POUNDED
TOGETHER, THE POLE SECTIONS
SHOULD HAVE A 3-1/2” (8,9 CM)
OVERLAP.
Wood Scrap
(not supplied)
DIMPLE
TROUGH
