13
Pole mounting bracket (20) will need to be lightly pressed into backboard ribbing. Be
sure to press completely into place. Attach rim (18) to backboard (22) and pole
mounting bracket (20) with knob (17), reinforcement bracket (11), and carriage bolt (16)
as shown. Tighten knob completely.
sAWHoRse oR suppoRT TABle
16
17
11
20
Carefully tip unit forward and slide
backboard assembly onto pole as shown.
KNoB MusT Be TIGHTeNed
coMpleTely ANd
cHecKed FoR TIGHTNess
BeFoRe eAcH use.
BoARd sTyle
MAy vARy
WARNING!
NoTe:
18
22
PRESS POLE
MOUNTING BRACKET
(20) INTO PLACE HERE
7.
